Search

Call Now for A Free Quote From A Mold Remediation Expert Near You!

Tips For How To Remove Mold From Carpet

How to Get Rid of Carpet Mold

Mold is not only unpleasant to look at and unpleasant to smell, but mold exposure is also harmful to your health.

So if you’ve got mold in your carpet (or anywhere else in your home), you definitely want to get rid of it as soon as possible to keep your home clean and your family healthy.

In this article, we will give you a run down of removing mold from your carpet. Then, we will go over some ways of preventing mold in the first place.

So check out these quick tips on how to remove mold from carpet, and how to tackle your mold infestation head on!

Table of Contents

What Kills Mold In Carpet?

kill black mold in carpet

There are a number of different mold-killing agents that people use around the house including the more toxic bleach and ammonia as well as the less toxic baking soda, vinegar, and hydrogen peroxide.

To remove mold from carpet, use either a store bought mixture intended for carpet mold or make your own mold-killer using one of the following ingredients.

Do not mix these active ingredients together unless otherwise specified. Mixtures can become highly toxic and dangerous, so always know what you are dealing with and read the instructions very carefully.

  • Baking soda. For light mold problems, sprinkle a generous amount of dry baking soda on the moldy spot. Leave overnight. Vacuum up in the morning. Baking soda is great because it is clean, doesn’t have a strong odor, and is inexpensive.
  • White vinegar. Put some pure white vinegar in a spray bottle and spray generously over the affected area. Let sit for a few minutes (but not so long that it dries) and then scrub vigorously with a stiff brush. Blow dry the area. Vinegar works well, but some are turned off by the strong smell.
  • Rent a HEPA vacuum. A HEPA vacuum is one approved for filtering out mold spores. This is best used after successfully removing an infestation. It will pick up any last remaining spores before they have a chance to start a whole new mold problem.
  • Steam Cleaner. Steam cleaners are available to rent as well, and could be a great solution to remove your mold infestation. However, be sure to dry your carpet immediately after, as the moisture buildup could encourage new mold growth if left alone.

All this is to say that knowing how to clean mold from carpet is mostly about knowing exactly how different cleaning agents affect mold and then deciding which kind of results you will need.

As with anything involving chemicals, know what you are working with before making decisions. Do not use solutions or mixtures that you have not been recommended to kill mold.

Do your research, properly identify the type of mold you are dealing with, and use a recommended chemical or cleaner.

Getting Rid of Carpet Mold Today

getting rid of carpet mold

The first thing you need to do if there’s mold in car carpet or mold in your home is identify exactly where it is and how deeply it goes.

If you’ve got mold under carpet pad, simply cleaning the fibers on the surface will not do the trick. You need something that can penetrate through and kill the mold at its roots underneath.

Choose an option from the suggestions above based on where the mold stain is and how deeply or widely it has spread.

By attacking the exact mold problem that you are dealing with, you are learning not only how to clean the mold but also how to get mold smell out of carpet. Because once the mold is gone, that unpleasant odor will leave with it!

When you actually get down to the dirty work, make sure that you are wearing protection.

This is true even if you are using nontoxic cleaning agents because the mold itself can be toxic and the scrubbing will cause it to spray mold spores into the air. So, at minimum you will need a respirator. But protective goggles and rubber gloves are also recommended.

As you can see, there are many variables in any mold issue, from the type of mold, the severity of the mold infestation, to the type of chemicals you should use.

If all this is too overwhelming, there is always the option to hire a professional who will be able to identify the extent of your problem and solve your mold problem for you. This is a more expensive option, but sometimes the peace of mind is worth it.

In the next section, we will show you how to prevent carpet mold before it starts.

Preventing Carpet Mold

how to prevent carpet mold

Killing carpet mold is certainly effective in removing your mold problem, but something that is even more effective is not having to deal with mold growth in the first place! Here’s a few tips for preventing carpet mold before it begins:

More Ventilation: Moisture from high humidity in the air will allow mold to grow in your home and on your carpets. Therefore, increasing ventilation will help to eliminate moisture in the air and decrease your chance of mold. Do things such as running a fan on problem areas, or leaving the windows open when possible. A dehumidifier could also be a good option, if you are not able to leave your windows open as often as you like.

Vacuum Your Carpets: Cleaning and vacuuming your carpet regularly is a great way to suck up mold before it gets too prevalent. Regular vacuuming will be able to eliminate problem areas before they become too extensive to be tackled by a regular vacuum cleaner.

Lights: Mold grows in the dark, so if you leave the lights on in your house, you reduce the mold’s chances to grow and prosper. This may not be realistic if you are serious about conserving energy, but the option is there.

These are all great ways to prevent mold build-up before it begins.

The best type of mold problem is no mold problem, so be sure to take preventative measures whenever possible. Add a routine mold inspection into your household maintenance schedule, and solve the problem before it starts.

Final Word

Learning how to get mold out of carpet can seem like a challenge but we hope this quick guide to mold removal from carpet has helped demystify the topic and empowered you to take charge.​

Of course, we hope that our recommended preventative measures will stop you from having to face this problem. But if you do end up with a mold issue, don’t fear.

Assemble your arsenal of mold killing agents and start cleaning away that mold on carpet today! You will notice the difference immediately!

Resources:

117 Shares